Computer Automation Technology WX-200 Manual page 16

Test County FIP Codes
After a data transfer, press the FIP code switch. The voice synthesizer will read out the county FIP
codes stored in memory. Example: The voice will say: "TEST FIP CODES 013067 013089 013121."
The voice synthesizer will also announce the station ID if programmed and enabled.
Reset WX-200 Memory
Remove +12VDC power from the WX-200 receiver. Set dipswitch #4 to the ON position. The WX-200
will reset and the voice synthesizer will say: "WX-200 VERSION 1.00 RESET DATA LOAD COMPLETE".
Set dipswitch #4 to the OFF position.
Print History
To print the alert history, click the [PRINT HISTORY] button.
3-7