Configuration Programming - Computer Automation Technology WX-200 Manual

Chapter 3 - Configuration Programming
The WX-200 Configuration program requires a Windows 95, 98, 2000, NT or Me operating system.
Install the program. Press START, PROGRAMS, and WX1000 Weather Receiver to display the [WX-200
DIGITAL WEATHER RECEIVER] window.
WX-200 Setup
Click the [Program Setup] button to display the [WX-200 SETUP] window. Select your computer's
serial port or click on the "Serial Port Test" button.
connected to the WX-200. The time of the alert is sent in the digital packet as GMT time. Select your
time zone so the configuration program can calculate your local time. Check the box to automatically
adjust for daylight savings time. Click [OK].
Figure 3-1
Your computer will determine which port is
Figure 3-2
3-1