Computer Automation Technology WX-200 Manual page 13

WX-200 Event Codes
Click the [STORM CLOUD] button to display the [WX-200 EVENT CODES] Window.
twenty-four events by checking the box next to each event. When the selections are complete check
OK.
WX-200 Options Settings
Click the [TOOLS] button to display the [WX-200 OPTIONS SELECT] Window. Options include Accept
all FIP Codes, Accept all Event Codes, and Ignore the Termination Data Packet (Use Line Time Out).
Select the desired options and click [OK].
Override Options
If the accept all FIP and Event Codes boxes are checked, the WX-200 will respond to all alerts issued
by the weather station. Operation is similar to a receiver with 1050Hz decoder only.
Figure 3-7
Figure 3-8
3-4
Select up to