Dimensional Drawing; Maintenance And Service; Warranty; Disposal - ABB VT Guard Pro Instructions For Installation, Use And Maintenance Manual

Table of Contents

6. Dimensional drawing

It is important to keep VT Guard Pro in cleanliness. Special attention should be paid to cleanliness of air-ventilation

gaps. In case, of choked air-ventilation gaps the device should be disconnected from the circuit (both functional and

diagnostic part), then the air-ventilation gaps can be cleaned by brush or compressed air. Other preventive

maintenance is not needed.

Any repairs must be done only by authorized personnel.

Manufacturer does not take responsibility for improper

device functioning in case of unauthorized servicing

Choked gaps may cause failure of appliance.

The manufacturer warranty is 24 months since the day of putting the apparatus into operation but not longer than 36

months since the day of purchase.

The device contains electronic parts. It should be disposed in electronic-waste recycling centre according to the local

law.

1VLM000651, Rev.3, en 2014.01.21

Table of Contents

Show Quick Links

Table of Contents

Vt guard pro-d