Advertisement
4ipnet
W H G 30 1 S e c u r e W L A N C o n t r o l l e r
Step 6. Save and Restart WHG301
Click Restart to save current settings and
restart WHG301. The Setup Wizard is now
complete.
While restarting WHG301, a "Restarting now.
Please wait for a moment." message will
appear on the screen.
Please do NOT interrupt WHG301 restart process
until the Configuration Wizard pop-up window
has disappeared – which indicates the restart
process has been completed.
Now, the basic configuration is completed.
If all steps are done properly, you can start working
on the system or refer to the user's manual for
advanced settings.
C o p y r i g h t © 4I P N E T , I N C . A l l r ig h ts r es er v ed .
< User Login >
After completing the configuration wizard, the user
account generated in Step 5 can be used to login to
the system to verify whether the configuration is
done properly.
First, connect a client device (e.g. laptop, PC) to
one of the LAN1~LAN8 Ports. If the client device
already has a static IP setting, the administrator
can enable the "IP PnP" function to support static
IP without changing the IP setting on client device.
Otherwise, the client device must be set to use
DHCP in TCP/IP configuration to obtain an IP
address automatically.
1.
Open an Internet browser on a client device
and access any URL, the default User Login
Page will be displayed.
2.
Enter a username and password previously
created in the Local User account database
(e.g. "test@local" for Username and "test"
for Password) or from an On-demand User
account.
Check the Remember Me box to store the
username and password on the current
computer in order to automatically login to the
system at next login. Then, click the Submit
button.
The Remaining button on the User Login
Page is for on-demand users only, where they
can check their Remaining Usage time.
4ipnet WHG30 1
Q u ic k I ns ta l l a tio n Gu id e
ENGLISH
EE
Advertisement
