Using Second Screen - Denver MT-723 TWIN Operating Manual

Quick Starting Guide
5. Press the PLAY/PAUSE button to start
playback.
In general, the DVD already
inserted into the player will
start reading automatically
when power is turned on.
The DVD player will
immediately start rendering the DVD program.
When you want to stop,
press the STOP button, it will
return to the power-on logo.
To power off the unit,
and hold the POWER button
until the screen turns off.
•The DVD player will automatically power off in
three minutes after entering screen saver
mode.
MENU
PLAY/PAUSE
MENU
press
13

Using Second Screen

1. Power the second screen from the main unit.
Connect the supplied power cable between the DC OUT
9-12V socket on the main screen and the DC IN 9-12V
on the second screen (see below).
2. Slide the power switch to on to turn on the
second screen.Connect the AV cables as described
below.
• Connect the black end of the audio cable to AUDIO
OUT socket of the main screen.Connect the red end of
the cable to AUDIO IN (R) socket of the second
screen,and the white end to AUDIO IN (L) socket.
• Connect the yellow 3.5 mm plug between the video out
(yellow) socket on the main screen and the yellow
VIDEO IN socket on the second screen.
3.You can slide the aspect ratio switch to change the
LCD mode between 16:9 and 4:3,and you can also
adjust the level of Bightness and Colour by turning
the dial of the right side.
STOP
The second screen
The main screen
VIDEO R /MONO-AUDIO -L
DC IN
4:3 16:9
9-12V
Yellow power cable
Red White
14
ON POWER OFF