Table of Contents
Advertisement
Philips Sound Solutions
3.3.2.
Equalizer Tab
The Equalizer (EQ) controls the frequency response of the system by increasing or decreasing
the frequency response of ten independent frequency bands.
This Equalizer works very much the same as the equalizers in high quality sound systems. Each
slider controls the relative level of a band (range) of frequencies. The number listed above each
slider column is the center frequency of the band controlled by that slider. When a slider is set to
the center position, frequencies within this band left flat and the gain is 0dB. See Figure 7.
Figure 7
To boost the level of a given band, move its slider above the centerline. To cut the relative level
of a given band, move its slider below the centerline. Maximum boost or cut is ±12dB on each
frequency level.
Sliders can be individually centered by right clicking anywhere within the slider area, or
collectively by clicking the Reset button on top right corner of the panel. Clicking the default
button on the Compact Control Panel can also collectively center the sliders. Please note that
the default button resets several other features as well.
13
Advertisement
Table of Contents
