Download Print this page

Basic Operation - Pioneer AVH-A215BT Owner's Manual

Dvd rds av receiver

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Remote Control
Volume (+/-)
MODE
Press to turn the display on or off.
SRC
Press to cycle through all the available sources.
Press and hold to turn the source off.
TOP MENU
Press to return to the top menu during DVD playback.
MENU
Displays the DVD menu during DVD playback.
Thumb pad
Use to select a menu on the DVD menu.
MUTE
AUDIO
Press to change the audio language, subtitle language or viewing angle
SUBTITLE
during DVD playback.
ANGLE
BAND/ESC
Press to select the tuner band when tuner is selected as a source.
Press to switch between media file types when playing the following types of data:
Disc, USB
RETURN
Press to return to the specified point and start playback from there.
Press to pause or resume playback.
or
For audio: Press and hold to perform fast reverse or fast forwards.
For video: Press to perform fast reverse or fast forwards.
or
Press to return to the previous track (chapter) or go to the next track (chapter).
Press to answer or end a call.
Press to stop playback.
If you resume playback, playback will start from the point where you stopped.
Press the button again to stop playback completely.
FOLDER/P.CH
Press to select the next or previous title or folder.
Press to recall radio station frequencies assigned to preset channel keys.
Press to answer or end a call.

Basic operation

Resetting the microprocessor
CAUTION
• Pressing the RESET button resets settings and recorded contents to the factory settings.
– Do not perform this operation when a device is connected to this product.
– Some of the settings and recorded contents will not be reset.
• The microprocessor must be reset under the following conditions:
– Prior to using this product for the first time after installation.
– If this product fails to operate properly.
– If there appears to be problems with the operation of the system.
1
Turn the ignition switch OFF.
2
Press RESET with a pen tip or other pointed tools.
Settings and recorded contents are reset to the factory settings.
Preparing the remote control
Remove the insulation sheet before use.
How to replace the battery
Insert the CR2025 (3 V) battery with the plus (+) and
minus (-) poles orientated properly.
WARNING
• Do not ingest the battery, Chemical Burn Hazard.
(The remote control supplied with) This product contains a coin/button cell battery. If the coin/
button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to
death.
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the product and keep it away from
5
En

Hide quick links:

Advertisement

loading