Front Rits; Tips For Inserting Atca Front Rits; Figure 8: Atca Front Board Handles - First Step To Remove A Board - Alcatel-Lucent 9130 BSC Evolution Maintenance Handbook

3 Maintain the ATCA Subrack

3.5 Front RITs

Note:

3.5.1 Tips for Inserting ATCA Front RITs

3.5.1.1 First Step to Remove a Board
28 / 90
This section covers the replacement of the following RITs:
JBXTP
JBXOMCP/JBXCCP
JBXSSW.
Two handles secure the Front RITs in place.
The following sections contain figures showing how to insert ATCA front RITs.
To remove a board:
1. Unfasten screws of front plate until board is detached from shelf.
2. Move the ejector handles outwards. The blue LED blinks indicating that the
board power OFF process is on-going.
The following figure shows the first step to perform when removing a board.

Figure 8: ATCA Front Board Handles - First Step to Remove a Board

3BK 21281 AAAA PCZZA Ed.13