Philips 107T71/05 Electronic User's Manual page 27

Frequently Asked Questions
23. How do I adjust the picture on the screen?
Please perform the following to correct the picture image:
Reset your monitor via the OSD menu
Adjust the Horz (width) and/or Vert size (height) in the OSD
Change monitor timing to work at the recommended resolution
24. The edge of the picture on the screen appears to be distorted. How can I correct this?
Please perform the following to correct the picture image:
A magnetic or electrical interference typically causes poor geometry in the picture. Place the
monitor in a different physical location
Reset the monitor to the factory preset via the OSD menu
Access the Geometry Menu in the OSD of the Monitor and perform the necessary adjustments
Change the monitor timing to the recommended resolution
25. The picture appears too dim. How can I correct this?
Adjust Brightness and/or Contrast via the monitor 's OSD. Some models have a Video Input Select
under Advanced Controls in the monitor 's OSD. Most computers require it to be set at 0.7V.
Please review the following for possible solutions:
If the OSD menu is also dim, please contact service for repair
Reset the monitor via the OSD menu
Change the color temperature settings to 9300 color coordination via the OSD menu
file:///D|/EDFU/crt_17_6/edoc/english/FAQ.HTM (11 of 13)2005-05-19 ¤W¤È 10:16:26