Configuring The Comfortel Ws-R2/R4 - Auerswald COMfortel WS-R2 Setup Manual

Note: The driver required for the USB/RS-232 adapter cable is
automatically installed by the latest Windows operating systems
as a standard. Otherwise, you can download and install the driver
manually (see http://www.ftdichip.com/Drivers/VCP.htm).
Insert the adapter cable's RJ-12 connector into the splitter's
5.
RJ-12 socket.
The LED on the front side of the casing flashes red.You
can use the ServiceTool to configure the repeater.

Configuring the COMfortel WS-R2/R4

Note: You will find more information about the configuration of
the COMfortel WS-R2/R4 in the help of the ServiceTool.
COMfortel WS-R2/WS-R4 - Setup Guide V04 11/2015
Commissioning
25