Care And Maintenance - aidapt Comfort Knight VG814 Usage And Maintenance Instructions

REISSUE
If you reissue or are about to reissue this product, please thoroughly check all components for their
safety.
If in any doubt, please do not issue or use, but immediately contact your supplier for service
support.
CARE & MAINTENANCE
1. The Comfort Knight
Aidapt Bathrooms Ltd.
2. Regularly check that the lateral strap is secure.
3. When cleaning the Comfort Knight
any liquid ingress and remove all connections to mains and the actuator itself.
4. Always remove the Comfort Knight
5. Only use soap and water or disinfectant to BS 6424 to clean all parts of the Comfort Knight
Excluding the actuator and other electrical parts.
6. Should you have a blown fuse to the 3 pin main plug, ensure that it is replaced only with a 3
Amp fuse.
IMPORTANT INFORMATION
The information given in this instruction booklet must not be taken as forming part of or establishing
any contractual or other commitment by Aidapt Bathrooms Limited, Aidapt (Wales) Ltd or its agents or
its subsidiaries and no warranty or representation concerning the information is given.
Please exercise common sense and do not take any unnecessary risks when using this product; as the
user you must accept liability for safety when using the product.
Please do not hesitate to contact the person who issued this product to you or the manufacturer
(detailed below) if you have any queries concerning the assembly/use of your product.
Aidapt Bathrooms Ltd, Lancots Lane, Sutton Oak, St Helens, WA9 3EX
Telephone: +44 (0) 1744 745 020 • Fax: +44 (0) 1744 745 001 • Web: www.aidapt.co.uk
Email: accounts@aidapt.co.uk • adaptations@aidapt.co.uk • sales@aidapt.co.uk
Usage and Maintenance Instructions
TM
must only be serviced by a trained, competent engineer appointed by
TM
make sure you completely cover the actuator to avoid
TM
mattress and cover from the unit and clean separately.
8
TM
Ver. 2 07/2012 (1556)
.