Memory Function
Memory Input
Your Automatic Digital Blood Pressure Monitor has a
memory feature. When a valid measurement is made,
the reading data (systolic, diastolic and pulse rate) will
be stored in the memory automatically as soon as the
unit is turned off, automatically shuts off, or when
another measurement is initiated.
The unit has the capacity to store 7 readings, and
also computes an average of up to the 7 memory
readings. When more than 7 readings are taken and
recorded to memory, the oldest ones will be deleted.
Memory Recall
By pressing the MEMORY button, you will see "A" in the
lower left hand corner of the display. It means you are
looking at the average of all the measurement results.
Pressing the MEMORY button again, the newest set of
measurement results is indicated by "1".
again, the next set will be displayed.
Memory Erase
When the batteries are taken out of the monitor, all re-
cords will be erased.
Note : When taking a measurement, the MEMORY button
is inactive.
Memory Number
Press it
9 9