Removing The Doors - LG LRSES2706 Series Owner's Manual

Removing the Door
When it is necessary to move the appliance
through a narrow opening, removing the
doors is the recommended procedure.
WARNING
• Disconnect the power cord, house fuse or
circuit breaker before installing or servicing the
appliance. Failure to follow these instructions
may result in death, fire or electric shock.
If your entrance door is too narrow for the
appliance to pass through, remove the appliance
doors and pass the appliance laterally.
For both freezer and fridge
1
Remove the screw of the hinge cover on top of
the appliance by rotating it counterclockwise.
2
While pressing hook of the link of the
electrical connectors, remove the link by
pulling it in both directions.
3
Remove the hinge lever by tapping the end
of it toward the outside edge of the cabinet.
CAUTION
• When removing the upper hinge, be sure to
support the door as it will fall forwards. It is
recommended that two or more people
carry out the door removal and refitting.
4
Lift the upper hinge fixed between the
appliance and the appliance door and then
remove it.
Upper hinge
Door
5
Lift the upper hinge fixed between the
appliance and the appliance door and then
remove it.
Refitting the Door
Mount the doors in the reverse sequence
of their removal once the appliance has been
passed through all access doors.
INSTALLATION 15