Hama AV-1200 AIR Manual page 44

1-6. How to select the Cable TV programs from the transmitter and record while viewing the
programs on TV2?
Note:
The transmitter allows COMPOSITE signals input from the TV1 source, and transmit the signal to the TV 2
on the receiver. The VCR on the receiver side thus can record the TV1 source programs.
Operation:
1. Press POWER key to turn on the Receiver.
2. Power on TV Set:
you can turn it on with its own remote controller from receiver side and select favorite programs
when the RF transmission function is ON.
3. Press the TV key under TV 2 region on the remote (or press the TV 2 source key on the front panel)
into TV mode .
4. Use your TV remote controller to operate.
Record programs:
Power on the VCR / DVR with its remote controller and press REC key to record the TV programs directly.
Please note that the VCR / DVR can only record the selected program on TV2.
LED Status: The GREEN LED 5 is on.
– 44 –