Download Print this page

Kohler ARTIFACTS 72798T Installation Instructions page 2

Slider bar, slider bar trim

Advertisement

INSTALLATION
1
2
8
3
7
6
4
5
1
2
3
4
5
6
7
8
INSTALLATION CHECKOUT
Pinch cock
CLEANING INSTRUCTIONS
All Finishes: Clean the finish with mild soap and warm water. Wipe entire surface completely dry with clean soft
cloth. Many cleaners may contain chemicals, such as ammonia, chlorine, toilet cleaner etc, which could
adversely affect the finish and are not recommended for cleaning.
Do not use abrasive cleaners or solvents on Kohler faucets and fittings.
1271403-2A-A
Select a suitable location to drill two holes on the finished
wall according to the rough-in dimensions and diameter of
the anchor(1), their distance is 712mm. Press the anchors
into the holes.
Apply a ring of plumbers putty or sealant into the groove on
the backside of the slide bar trim. Position the trim and
post(3) over the mounting hole. Secure the trim and post to
the wall with a screw(4). Loosely tighten the screw.
Hold the slide bar up against the posts. Adjust the position
of the posts until the slide bar fits snug against the curved
cutout of the posts. Remove the slide bar and tighten the
screws to secure the posts.
Thread the pin(5) into the post, tighten with a flat blade
screwdriver.
Line up the hole of each lock assembly(6) with the holes of
the slide bar. If needed, use a screwdriver to adjust the
position of the lock assemblies.
Align the pins with the holes in the slide bar and slide bar
locks. Insert the pins through the slide bar and lock
assemblies.
(7) into the
Secure the slide bar by tightening the setscrews
lock assemblies. Press the cap
(8) into each end of the
slide bar.
Ensure that all coupling nuts are tightened.
The height of handshower holder can be adjusted by
pressing the pinch cock and sliding up and down.
SERVICE PARTS
72798T:1061576
72799T:1199644**
**Color code must be specified when ordering.
NOTE: For all Asia pacific regions (excluding China) add SP (SPxxxxxxx**) in front of the part number when ordering.
2
1271403-2A-A
72798T
Slider Bar
72799T
Slider Bar Trim
72798T:1199646**
72798T:34300
72798T:1033803
72798T:34300
72798T:1040645**
72798T:1033799**
72798T:1033800**
72798T:1033797**
ARTIFACTS
72798T:1271405**
3

Advertisement

loading

This manual is also suitable for:

Artifacts 72799t