Philips CT3308/00SRASIA User Manual page 68

Each of these settings allows you to:
L
GSM Settings
Allows you to enter or change the GSM settings and gives you access to the
following items:
GSM Settings
Login
cases, enter the information and press
Phone Number
connection with your WAP Service Provider (ISP). Select
press
Enter the "+" sign followed by the number provided by your operator and press
,
.
L
Inactivity time
phone automatically ends the WAP session (if a connection was
and returns to idle screen. Select
value (in second) of over 30 s. and press
Change name
Allows you to enter or change the name of the selected WAP profile. Press
,
, enter the name of your choice and press
Change name
Gateway
Allows you to enter or change the IP address and port number (subscription
dependent) for the gateway: select Gateway and press
Gateway
Address and press
- Visualise all parameters of the selected WAP profile (Gateway IP
Address, Homepage address, phone number, etc.),
- Activate the selected profile (which then becomes the default profile
and is used for connection),
- Change the parameters of the WAP profiles as described below.
Some pre-configured profiles might be locked, preventing re-programming.
-
Login
and Password allow you to enter the login and password needed. In both
allows you to enter the phone number needed to establish a
,
, then press up or down to select:
- ISDN No. to enter an ISDN ISP number, OR
- Analogic No.
Contact your operator to know what type of number you should select.
allows you to enter an inactivity time period after which the
,
.
-
Password Phone number
,
to confirm.
to enter an analogic number, then press
Inactivity time
,
-
Inactivity time
Phone numbers
,
and press , then enter a
.
,
to confirm.
,
, then enter the IP
WAP services
and
,
.
in progress)
67