Code Of Eeprom_I2C; Code Of Enddevice_I2C - Fujitsu F2MC-8FX Series Application Note

4.6.18 Code of EEPROM_I2C

unsigned char Coordin=0;
if(PraGlo.CoordiFlag == 1)
{
Write_I2C(AddrEEPROM,
PraGlo.DatSlavI2CRead,PraGlo.DatSlavI2CRead);
Coordin = Read_I2C(AddrEEPROM,PraGlo.DatSlavI2CRead);
if(Coordin == PraGlo.DatSlavI2CRead)
LEDCoordin(1);
PraGlo.CoordiFlag = 0;
PDR0_P05 = 1;
}
else
{
Coordin = Read_ADC();
Write_I2C(AddrEEPROM,Coordin,Coordin);
LEDCoordin(0);
}

4.6.19 Code of EndDevice_I2C

unsigned char ValuAdc, AddrEndDevi;
ValuAdc = Read_ADC();
AddrEndDevi = Judge_SlaveAddr(ValuAdc);
Write_I2C(AddrEndDevi, 0x01,0x01);
if(PraGlo.CoordiFlag == 1)
{
Write_I2C(AddrEndDevi,
PraGlo.DatSlavI2CRead,PraGlo.DatSlavI2CRead);
ValuAdc = Read_I2C(AddrEndDevi,PraGlo.DatSlavI2CRead);
if(ValuAdc == PraGlo.DatSlavI2CRead)
}
else
{
Write_I2C(AddrEndDevi,ValuAdc,ValuAdc);
LEDCoordin(0);
}
MB2146-460-E Setup Guide V1.2
Chapter 4 Sample Code Manual
LEDCoordin(1);
MCU-AN-500083-E-12 – Page 49