Charging The Battery - Philips CT9A9VRED/40 User Manual

Cellular mobile radio gsm 900/1800, gsm/gprs networks
Hide thumbs Also See for CT9A9VRED/40:
Table of Contents

Advertisement

If you enter an incorrect PIN code three times, your
SIM card will be blocked. To unblock it, you must
request the PUK code from your operator.
When you switch on your mobile phone with your
new SIM for the first time, you will be asked for the
following:
Set date
To set the current date.
Set time
To set the current time.
See "Settings" on page 49 for details on these two
items.

Charging the battery

Your phone is powered by a rechargeable battery. A
new battery is partially charged and a sound alert will
warn you when the battery reaches low, if the battery
On
alert is
(see "Display" on page 50).
Once the battery and battery cover are back in place,
you can charge the phone. Pull away the protective
rubber cap covering the charger connector. Plug in the
Getting Started
connector as shown below. Then plug the other end
into a main AC power socket.
The battery symbol indicates the state of charge.
During charging, the charge indicators will scroll; it
takes around 4 hours to fully recharge your mobile
phone. When all the scroll bars are steady, the battery
is fully charged. You can then disconnect the charger.
Depending on the network and condition of use, talk
time goes up to 8 hours and stand-by time up to 1
month.
Keeping the charger plugged to the mobile phone
when the battery is fully charged will not damage the
battery.
7

Advertisement

Table of Contents
loading

Table of Contents