Table of Contents
Advertisement
2. As shown, press the bolt to unlock the SIM
card. Slide the SIM card and take it out.
3. Replace the battery and the back cover.
Switch on the phone
To switch on the phone, long press
the PIN code if required. It is preconfigured and
communicated to you by your operator or retailer.
For more information on PIN code, see "Security".
If you enter an incorrect PIN code three times
in succession, your SIM card will be locked. To
unlock it, you must obtain the PUK code from
your network operator.
Getting Started
Charge the battery
Your phone is powered by a rechargeable battery.
A new battery is partially charged and a sound alert
will warn you when the battery reaches low. Once
you have installed the battery, you can start
charging the phone.
Plug in the charger connector as shown below.
Then plug the other end into a mains AC power
socket.
)
key. Enter
During charging, the charge indicators will scroll. It
takes around 3 hours to fully charge the battery.
When all the scroll bars are steady, the battery is
fully charged. You can then disconnect the charger.
Keeping the charger plugged to the mobile
phone when the battery is fully charged will not
damage the battery. The only way to turn off the
7
Advertisement
Table of Contents
