Activate The Vibrator; Reading Your Own Gsm Phone Number; How To Enter Text Or A Number - Philips CT2888/OUABAAGB User Manual

Activate the vibrator

If you have set the function, your phone vibrates when receiving an incoming call
(activating the silent mode via the
activate the vibrator). Otherwise, proceed as follows:
In idle screen, press , and select
1
 Move + or - to select
2
Activating the vibrator doesn't mute the ringer. If you want to mute it and keep the
vibrator function on, activate the

Reading your own GSM phone number

To read your own mobile phone number, proceed as follows:
In idle screen, press , orC.
1
2 In the
phone number is displayed if present on your SIM card. If not, select New, then

follow the instructions displayed on the screen.
If your own number has been stored in the Names list, you can read it during a call.
See "Consulting the Names list" page 13.

How to enter text or a number

Text can be entered in editing screens in two different ways: by using T9™ Text
Input, or basic text input. Two other modes for numbers and punctuation marks, are
also available. Icons in the upper and lower right corners of the screen show the
active text edition mode. You switch from a mode to the other by pressing the *
key, and from lower to upper case by pressing the # key.
Main features
menu, move + or - to select
Names
Silence Quicksetting as described above will also
Settings >
and press , to confirm.
On or Off
Silence mode as described above.
Sounds > Vibrator.
num., then press ,. Your
Own
15