Erasing Messages; Personalising Your Answering Machine - Philips TD6600 User Manual

Erasing messages

Erasing individual messages
1
2
3
Erasing all the messages received
1
2
3

Personalising your answering machine

If you have recorded an outgoing message and set the day and time, you can use
your answering machine. However, you can also personalise the settings your
answering machine.
The following possible settings are available:
•
Select the voice prompt for received messages (
•
Define a remote control code (
•
Choose the number of times the telephone rings before your answering machine
picks up (Number of rings).
•
Decide whether your callers can leave a message (
18
r
Press the key on the handset.
r
is displayed.
The display shows the day, time and the number of messages received.
If it has been selected, the voice prompt starts up.
V
Press .
The answering machine plays back the messages.
While listening to the messages, press
machine plays back the message you want to erase.
A beep confirms that the message has been erased. The number of the
received messages displayed is updated automatically.
r
Press the key on the handset.
s
Press .
x
Press and hold
A beep confirms that all the messages have been erased.
See "Switching the message voice prompt on or off" on page 19.
See "Entering a remote control code" on page 19.
See "Changing the number of rings" on page 20.
See "Switching message record on or off" on page 21.
Your Xalio Vox answering machine
for more than 1.5 seconds.
RCC: - - - -
x
when the answering
VOICE
).
).
REC MESS
).