Table of Contents
Advertisement
Using your Onis
Making a call
Direct dialling
1
2
3
Dialling with number preparation
This way of dialling allows you to make corrections to the number before dialling.
1
2
3
8
t
Press the
key on the handset.
t
The
symbol is shown on the display and you hear the dial tone in the
handset earpiece.
Dial the number using the number keys.
The number called is displayed after the last key is pressed.
If the number you enter is longer than 10 digits, the display will scroll the
number to the left to show the last digits.
To hang up, press
The duration of your call in minutes and seconds is displayed for 4 seconds.
Dial the number (up to 23 digits) before pressing the
+
use the
key to make corrections by cancelling the last digit
entered.
If the number you enter is longer than 10 digits, the display will scroll the
number to the left to show the last digits.
If you want to see the whole number you have dialled so far, press
o
. The number will scroll to the left if it is longer than 10 digits.
t
Press the
key on the handset.
The number prepared is automatically dialled.
Onis Memo only: you can also press
and the number is dialled.
To hang up, press
The call duration is displayed for 4 seconds.
Using your Onis
t
or replace the handset on the base station.
Tip
H
. The handset loudspeaker is activated
t
or replace the handset on the base station.
t
key. You can
Advertisement
Table of Contents
