Installing Your Onis; Connecting Your Phone; Deciding Where To Put The Base Station; Connecting The Base Station - Philips TD6611/BB051P User Manual

Connecting your phone

Deciding where to put the base station

•
To reduce to a minimum any interference with other electronic devices such as
telephones, televisions, screens, etc. we advise you to place your base station at
least 50 cm from any such device.
•
Place the base station on a flat surface such as a desk.
•
Do not install the base station in a damp or humid room.
•
Do not place the base station near a strong source of heat.
The operating range of your cordless telephone will vary according to your
environment. Significant obstacles such as concrete walls or metallic supports
(windows and door frames, partitions, etc.) will lessen the communication range
between the base station and the handset.
The range can be improved by placing the base station higher than the handset.

Connecting the base station

Make sure that you connect the power plug to the correct mains voltage of
220-240V.
1 Step one
Plug the power cable
into the base station
and then into the wall
outlet.
2 Step two
Plug the telephone
cable into the base
station and then into
the telephone
connector on the wall.

Installing your Onis

Installing your Onis 5