Verification To Ensure The Sensors Indicate The Tank Levels Correctly - Rockwood iRV Technical Service Bulletin

* Once the control panel reads empty, the software update is complete. Now you may proceed;
Fresh Tank: Fill through Potable
REMEDY INSTRUCTIONS – iRV TANK MONITOR
TO ENSURE THE SENSORS ARE CORRECTLY
INDICATING THE TANK LEVELS
STEP 3: BEGIN TO FILL TANKS TO FULL
Black Tank: Fill Toilet
STEP 4: FILLING THE TANKS
Once all of the tanks have been filled, the monitor panel will reflect all tanks as full.
If your tanks do not reflect full, ensure you have filled all tanks.
Some units are equipped with 2 black tanks (if you have 2 toilets) or 2 galley tanks.
STEP 5: FULL TANKS
When the Monitor Panel indicates "Full" by depicting yellow bars, the software update
was successful.
You may now empty all tanks.
VERIFICATION
Grey Tank: Fill Tub
*DO NOT OVERFILL*
Galley Tank: Fill Kitchen Sink or Lavatory Sink
Page 4 of 4