Software Update - Rockwood iRV Technical Service Bulletin

SOFTWARE UPDATE FOR RSB66
V1.25H BRAIN BOX (BLACK BOX) SOFTWARE UPGRADE WITH SERIAL NUMBER STARTING WITH 1606XXX - FIRST BATCH UPGRADE
V2.1H BRAIN BOX (BLACK BOX) SOFTWARE UPGRADE WITH SERIAL NUMBER STARTING WITH 1608XXX - SECOND BATCH UPGRADE
A. Plug the AC adapter into an 110V-120V outlet, then plug it
into the Program Module;
B. The arrow on the 10 Pin Connector should point towards
you while you plug it into the RSB66 (black box) unit;
C. A Blue Light and a Red Light (on the module right) should
power-on, indicating steps A and B are completed;
REMEDY INSTRUCTIONS – iRV TANK MONITOR
STEP 2: SOFTWARE UPDATE
D. Short Press the white button;
E. A Red Light, below the Blue Light, will power-on indicating the
Software Upgrade has begun;
F. When the module omits an audible chirp and the Red Light
below the Blue Light turns off, the Monitor Panel brain box (black
box) has updated with the required software.
Page 3 of 4