Zenia 6626 Base Station (Continued) - Philips TD6726/BG051P User Manual

Zenia 6626 base station (continued)

PROBLEM
The answer phone
does not record
your personal
OGM.
An error beep is
heard from the
base station when
you try to access
the answerphone.
The answer phone
does not record
incoming calls.
The answer phone
has stopped
automatically.
The red light is
flashing rapidly.
Remote control
does not work.
CAUSE
Memory is full (an error
beep is heard).
The answer phone is
already operating (play
or record).
The answer phone has
not been switched on.
Message recording is not
switched on (answer and
record mode).
Answer phone memory
is full.
The answer phone's
maximum memory has
been reached.
A power failure has
occurred.
You did not enter the
correct code.
You did not set a remote
control code.
The answer phone's
maximum memory has
been reached.
Maintenance and troubleshooting
SOLUTION
Delete messages to free
sufficient memory.
Wait until the answer phone is
available and try again.
Switch the answer phone on (see
"4.1 Selecting the answer
mode", page 44) (Zenia 6626).
Switch answer and record mode
on (see "4.1 Selecting the
answer mode", page 44) (Zenia
6626).
Delete messages to free
sufficient memory.
Delete messages to free
sufficient memory.
Reset date and time (see "3.3
Setting date and time", page 42).
Retry (see "Checking messages
remotely", page 35).
Change the code (see "4.8
Switching remote control on",
page 46).
Delete messages to free
sufficient memory.
53