Handset
Babysit mode
Registration
Rename handset
Babysit mode
To activate/deactivate the babysit mode
Press to enter the carousel menu
Scroll to Handset and select
Press to select Babysit mode
Press to select ON or scroll to
Note: An intercom is necessary to monitor the room (See p.22).You can still answer/make a call with the
handset.
Registration
Up to 4 handsets can be registered to a base station. 1 handset can be associated to 4 base stations.
Warning !: if you wish to associate non Philips handset, make sure that this handset is GAP compliant, otherwise
it will not operate properly.
1- Unplug and plug back in the mains lead to put the base in registration mode
2- With the additional handset press
3- Enter the 4-digit RC code written on the sticker placed under the base station
If successful the additional handset is named & numbered (example: Philips2)
To select a base station
Press to enter the carousel menu
Scroll to Handset and select
Scroll to Registration and select
Scroll to Base selection and select
Choose the base in the list and press
(only DECT3112)
to start the registration
Date & time
Display contrast
Screen saver
OFF and select
OK
Handset
17
http://www.philips.com/faqs/dect