Base station
Enable registration
Line settings
Service codes settings
Enable registration
This feature allows you to register a DECT peripheral without keypad
Some DECT peripherals, such as repeaters, do not have keypad. A special menu-operated procedure is
used to register such peripherals to the base station. Also use the peripheral instructions to register it to
the base.
To register a DECT peripheral
Press to enter the carousel menu
Scroll to Base station and select
Press to select Enable registration
Enter the peripheral code and press
Follow the instructions in the peripheral manual
Line settings
To change the dial mode
Press to enter the carousel menu
Scroll to Base station and select
Scroll to Line settings and select
Press to select Dial mode
Press to select Tone or scroll to
Note:This setting allows you to select pulse dialling (also called "Loop disconnect") and used in countries
without DTMF tone dialling capability or using old PABX.
36
http://www.philips.com/faqs/dect
OK
Pulse and select
Base station