Page 1
User Manual Escape Model: ™ ETM-LX-115 REV. 2/5/20 13655 Stowe Dr. Poway, CA 92064 P: (858) 679-1191 F: (858) 726-6005 www.mytee.com...
Page 2
If there are questions regarding maintenance, replacement, or ordering parts please contact an authorized Mytee Products Service Center. To see an updated list please visit our website at http://www.mytee.com/support/service-centers. Before using your Mytee product, please read this manual thoroughly.
Table of Contents Important Safety Information At a Glance 1.1 - Technical Specifications 1.2 - Included with the Escape ® 1.3 - Escape Front View ® 1.4 - Escape Rear View ® 1.5 - Switch Plate Machine Operation 2.1 - Powering the Escape ®...
This machine must be grounded. If it should malfunction or When and if calling Mytee for support, please have your break down, grounding provides a path of least resistance Model and Serial Number available for faster assistance.
Page 5
Important Safety Information To reduce the risk of fire, electrical shock, or injury: 14. Keep hair, loose clothing, fingers, and all parts of the 1. Read all instructions before using equipment. body away from all openings and moving parts. 2. Use only as described in this manual. Use only manu- 15.
1 - At a Glance 1.5 - Switch Plate 1. Chemical Injection Meter 4. Wash Out Hose Turn knob counter-clockwise to open valve and allow Use to wash out the recovery tank after use. chemical to siphon into the system. Turn all the way clock- 5.
Method 3 10,000 WATTS Mytee recommends the use of a 10,000 watt genera- tor with this unit. This will supply ample power for the ETM. However, the Escape ®...
2 - Machine Operation 2.4 - Using the Pump-Out 2.6 - Preparing for Freezing Weather Read this if you’re in a cold climate. Freezing temperatures can cause damage to the inter- nal components of the Escape if there is excess ®...
Maintenance Item Daily Weekly 3.3 - System Maintainer Clean and inspect tanks. Weekly flushing of the solution system with Mytee ® System Maintainer helps keep lines clean and prevents Clean and inspect hoses. chemical build-up, improving pump life, performance and Check and clean internal filters.
4 - Troubleshooting 4.1 - Vacuum Troubleshooting 4.2 - Pump Troubleshooting Vacuum is not turning on. Pump runs but there is no spray. Possible Cause Solution Possible Causes Solutions Vacuum may not be getting Check for faulty connec- Tank is empty. Fill tank.
Page 14
4 - Troubleshooting 4.3 - Pump-Out Troubleshooting Pump turns on but doesn’t pump out. Possible Causes Solutions Clogged filter. Check filter. Clear any ob- structions. Clogged pump. Flush tank and pump-out with clean water to clear debris from lines. Pump doesn’t turn on. Possible Causes Solutions Obstructed float switch.