Philips XL3401B/79 User Manual page 17

In standby mode :
Press and hold
1
Enter 51. Press and hold
2
BASE?.
Select the base using the digit keys (1, 2, 3 or
3
4). Press and hold
If you see PIN?, enter the system PIN
4
(default 0000). Press and hold
see SEARCHING....
Press and hold
5
3 seconds.
• The base will turn on the LED for 30 seconds.
• If registration is successful, handset will show
REGISTERED.
Note
If registration was not successful, the handset will
show FAILED. Repeat the above procedures
and try again.
5.3.2 Select a base
If your handset is registered to more than 1 base,
you can select which base the handset will use.
You can choose a fixed base or you can allow the
handset to automatically search for a nearby
available base (AUTO base selection).
In standby mode :
Press and hold
1
Enter the base index number (see below).
2
Press and hold
3
• If successful, handset will show the selected
base. Otherwise, handset will show FAILED.
Base selection
BASE 1
BASE 2
BASE 3
BASE 4
AUTO
5.3.3 Un-register a handset
A handset can un-register another handset
registered to the same base station. It cannot un-
register itself.
Use more of your phone
until you see MENU?.
until you see
to confirm.
until you
on the base unit for
until you see MENU?.
to confirm.
Index Number
64
65
66
67
68
In standby mode :
Press and hold
1
Enter 52. Press and hold
2
HANDSET?.
Enter the number of the handset you want to
3
unregister. Press and hold
If you see PIN?, enter the system PIN
4
(default 0000).
Press and hold
5
• If un-registration is successful, your handset will
show DELETED.
5.3.4 Change the system PIN
A PIN (Personal Identification Number) is
required to register and un-register a handset.
The factory preset PIN is 0000. You can change it
to a unique one of your own. PIN can be up to
8 digits long.
In standby mode :
Press and hold
1
Enter 50. Press and hold
2
PIN?.
Enter the system PIN. Press and hold
3
until you see NEW PIN?.
Enter the new PIN. Press and hold
4
you see REPEAT PIN?.
Enter the new PIN again for verification.
5
Press and hold
• If PIN is changed successfully, handset will
show SAVED.
Note
The default product PIN code is preset to 0000.
If you change this PIN code, keep the PIN details
in a safe place where you have easy access to
them. Do not lose the PIN code.
5.3.5 Reset your phone
You can reset your phone to factory settings. To
find out what settings are being reset, see
page 18.
In standby mode :
Press and hold
1
Enter 01 if you want to delete all the
2
memories.
until you see MENU?.
until you see
to confirm.
to confirm.
until you see MENU?.
until you see
to confirm.
until you see MENU?.
until
15