Registration; Unregister; Change Master Pin - Philips CD2451S/51 User Manual

7.7

Registration

The procedures described below are the
procedures that you will find in your
handset. The procedures may vary
according to the handset you want to
register. In this case, please refer to the
manufacturer of the additional handset.
Additional handsets must be registered to
the base unit before you can use them. Up
to 6 handsets can be registered to one
base station.
The Master PIN is required before you
can register or unregister handsets.
Note
By default, the Master PIN is 0000.
1
On the base station, press and hold
p
for approximately 5 seconds.
2
On the handset, press
:
scroll to
m
press
OK
REGISTRATION
Note
If no action is taken on the handset within
10 seconds, the registration procedure will
be aborted. If this happens, repeat Step 1.
3
Enter the Master PIN when
prompted and press
confirm.
Note
By default, the Master PIN is 0000.
4
WAITING _ _
screen.
• Upon successful registration, a
validation tone is emitted and the
handset numbers (1 to 6) will be
assigned by the base automatically.
32
m
key,
and
ADVANCE SET
:
, scroll to
m
and press
m
to
OK
is displayed on the
7.8

Unregister

1
Press
:
m
and press
2
Enter the Master PIN when prompted
and press
Note
By default, the Master PIN is 0000.
3
Scroll
number to unregister and press
m
• A validation tone is emitted to indicate
successful unregistration and the
screen shows
Note
If no action is taken on the handset within
15 seconds, the unregistration procedure
will be aborted and the handset returns
to idle mode.
To unregister a handset that does not
.
OK
belong to the CD240/245 range, you can
only use the CD240/245 handset to
unregister it.
7.9

Change Master PIN

The Master PIN is used for setting call
barring/baby call number, registration/
unregistration of handsets and for
accessing the answering machine
remotely. The default Master PIN
number is 0000. The maximum length of
the Master PIN is 8 digits. This PIN is also
used to protect the settings of your
handset. Your handset will prompt you
whenever the PIN is required.
m
key in idle mode, scroll
to
ADVANCE SET
:
, scroll to
OK
m
.
OK
m
to confirm.
OK
:
to select the handset
.
OK
UNREGISTERED
Advanced settings
and press
UNREGISTER
.