Sampler Roll - Pioneer Digital DJ-SR Tutorial

4. Sampler Roll

As long as you hold these pads continuously, sampler is automatically rolled in sync with the track's BPM.
A drum roll sound, which used to be difficult to create only by pads, can be easily created just by holding these pads.
First of all, look at how Sampler is assigned to each Pad.
Sampler is assigned as shown in Figure 4-1 and Sampler Roll mode can control Sampler playback in the same
way as in Sampler mode.
◆
Pad7 and Pad8 are not used in Sampler Roll.
Slot1 Slot2
Pad1 Pad2
Slot1 Slot2
Pad5 Pad6
Slot5 Slot6
Figure 4-1 Function assignment
Let's use the Sampler Roll features.
Display the [SP-6] panel using either one of the following method.
◆
Press the browse encoder with the Shift button for several times until the [SP-6] panel appears.
◆ ◆
Click the [SP-6] button on the computer screen. Click the [SP-6] button on the computer screen.
Load a track (Sample sound) to the Sampler Slot in either one of the following methods.
◆
Select a track and press a Pad (empty slot) while pressing the Shift button.
◆
Drag & drop a track using the mouse on the computer screen.
Short phrase, instrumental and effect sound in a few seconds up to 10 and odd second length of track (Sample sound)
would be good to load to the Sampler Slot.
LOOPMASTERS' free sample collection, "Loopmasters sample content", is bundled with Serato DJ 1.5.
If you do not have any sample sound, you can use samples in this free sample collection.
◆
Please see [9. How to install Sample collection] for further details of the free sample collection.
Let's load tracks (Sample sound) to all the Slots 1 - 6.
Slot3
Pad3 Pad4
Slot3 Slot4
Pad7 Pad8
Figure 4-2 Setting Sampler
19 19
Slot4 Slot5 Slot6