Related Manuals for Environmental Instruments ES008-M
Summary of Contents for Environmental Instruments ES008-M
- Page 1 Micromanometer User’s Manual Models ES008-M (or CT008 Manometer) Version 1.1 and below January 2020...
-
Page 2: Device Overview
1. Device Overview Figure 1.1 An overview of the front face of EIC manometer is given in Figure 1.1. The front face includes: ● OLED screen – display live or 10 seconds average pressure readings in unit of Pascal, and device information;... -
Page 3: Basic Operation
● Port 1 & 2 – the manometer measures the pressure differences between these two ports; ● Button – control device to turn on and off, to toggle OLED screens and to manually set zeros. 2. Basic Operation Basic operation of EIC manometer is outlined in the following steps: 1) There should 2 new AA batteries in the device when you receive the manometer. - Page 4 3) When you press and hold the button for at least 2 seconds, the OLED starts displaying some button instructions. You can follow the instructions on the OLED. By pressing the button for between 2 to 5 seconds, the OLED shows “Release to Zero” which means if you release the button now, the manometer will zeros the current readings.
- Page 5 3. OLED Screen Overview The OLED display not only pressure readings but also some useful information. For example, the screen displaying the average of 10 seconds is shown in Figure 3.1. The screen display includes: Screen Name: “LIVE” for 1 second average reading screen, “AVG”...
- Page 6 Unit: the readings are all in the unit of Pascal by default. Figure 3.1 4. Changing Batteries The manometer uses two AA batteries. Follow these steps to replace the batteries: 1) Unscrew the battery door screw; 2) Open the battery door; 3) Replace two AA batteries;...
- Page 7 5. Connecting Sampling Tubing The ports are sized so that standard silicone aquarium tubing slides easily on and off. If you want to lock the tubing in place more securely, slide a number 009 O-ring over the tubing. Roll back the O-ring before pulling off the tubing so that you don’t put too much stress on the manometer ports.
- Page 8 7. Feedback This is a very new product. (Our first non-radiation product.) Please let us know what you think. Please send comments, suggestions, constructive criticism to admin@eic.nu Thank You for your support!
Need help?
Do you have a question about the ES008-M and is the answer not in the manual?
Questions and answers