Connecting Hd1100 Power; Quick Management; Video Output; Poe - Teledelta HD1100 Quick Start And Operation Manual

1. Camera Lens
2. Camera Base
3. Remote Controller
Receiver light
4. Bottom DIP Switch

1.2 Connecting HD1100 Power

1. Connect DC12V power supply adapter with power supply socket.
2. Power Camera on from the supplied IR Remote control – the HD1100 camera head will move from bottom
left to the bottom right, and then goes to the HOME position (intermediate position of both horizontal and
vertical) while the camera module zooms and focuses.
Once complete the camera is ready for use.
1.3 Quick Management Page Access
The default web Management Address is: 192.168.5.163
Username: admin
Password: admin

1.4 Video Output

The HD1100 series has a variety of video outputs options depending on the model selected
Prefix -SDI models have video output from LAN, HDMI and 3G-SDI,
Prefix -USB3 models have video from LAN and USB3.0 which is compatible with USB2.0
Prefix -USB2 models have video from LAN and USB2.0.
Prefix -HdbaseT models have video from HDbaseT and LAN
NOTE: Audio is not transmitted over the USB2.0 or USB3.0 cables (in the above models) – thus an
external Microphone will be required plugged into the PC or capture device.
Audio and Video is present on all other outputs including HDMI, SDI, IP and HDbaseT

1.4.1 POE

Power (Power over Ethernet) is available on models across the HD1100 range

1.4.2 NDI (Network Device Interface)

Network Device Interface is available as an option on the HD1100 series.
TeleDelta is proudly an Australian owned company.
5
5. Tripod Screw Hole
6. Audio Input Interface
7. USB 2.0 Interface10/100M Network Interface
8. DC12V Input Power Supply Socket
\TeleDelta\HD Products\HD1100 Cameras