Ir Remote Operation; Remote Controller; Keys Instruction - Teledelta HD1100 Quick Start And Operation Manual

3.0 IR Remote Operation

3.1 Remote Controller

3.1.1 Keys Instruction

10. Camera IR Remote Control Address Setting
TeleDelta is proudly an Australian owned company.
1. Standby Key
Press for 3 seconds, the camera will step into standby mode. Press again for 3 seconds
and the camera will self-test again and move to the HOME position.
2. Camera Select – Select the Camera than needs to be controlled
3. Number Key - Set or run 0-9 presets
4. Focus Control Key - Auto Focus: Enter into auto focus mode. Manual Focus: The camera
focus mode is manual Switch the camera focus mode to manual focus by pressing [focus +] or
[focus -] to adjust.
5. Zoom Control Key
Zoom＋: Lens
near Zoom－:
Lens far
6. Set or Clear Preset key:
Set Preset: Set preset key + 0-9 number key:
Clear Preset key: Clear preset key + 0-9 number key
7. Pan/Tilt Control Key
Press Key :Up
Press Key :Down
Press Key :Left
Press Key: Right
"HOME" Key: Return to the middle position or enter into the next level menu
8. BLC Control Key
Back Light ON / OFF: Turn on or off the back light
9. Menu Setting
Open or close the OSD menu
Enter / exit the OSD menu or return to the previous menu.
17
s:\teledelta\HD1100\Manuals