Advertisement
Quick Links
Fitting Instructions:
Daytona 675
Alarm/Immobiliser - A9808092
Thank you for choosing this Triumph genuine accessory kit. This accessory kit is the product of
Triumph's use of proven engineering, exhaustive testing, and continuous striving for superior
reliability, safety and performance.
Completely read all of these instructions before commencing the installation of the accessory kit in
order to become thoroughly familiar with the kit's features and the installation process.
These instructions should be considered a permanent part of your accessory kit, and should remain
with it even if your accessory equipped motorcycle is subsequently sold.
Parts Supplied:
1. Alarm/Immobiliser kit
2. Fitting kit
3. Fitting instructions
Publication part number A9900449, Issue 2, ADC 9148
© Triumph Designs Ltd 2009.
1 off
4. Bungee strap
1 off
5. Battery drainage label
1 off
EN
1 off
1 off
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Triumph A9808092
Summary of Contents for Triumph A9808092
- Page 1 Fitting Instructions: Daytona 675 Alarm/Immobiliser - A9808092 Thank you for choosing this Triumph genuine accessory kit. This accessory kit is the product of Triumph's use of proven engineering, exhaustive testing, and continuous striving for superior reliability, safety and performance. Completely read all of these instructions before commencing the installation of the accessory kit in order to become thoroughly familiar with the kit’s features and the installation process.
- Page 2 Always ensure that newly installed wiring Triumph Daytona 675 motorcycles only and does not chafe against other parts of the should not be fitted to any other Triumph motorcycle such that they may be rubbed model or to any other manufacturer’s through and cause an electrical problem.
- Page 3 Use the cleaning wipe supplied for this 1. Seat purpose. 2. Reed-switch magnet Publication part number A9900449, Issue 2, ADC 9148 © Triumph Designs Ltd 2009.
- Page 4 REAR of the motorcycle and foam 1. Accessory alarm compartment pads at the bottom. Stretch the rubber 2. Bungee strap 3. Electrical cable (for fitment of bungee only) Publication part number A9900449, Issue 2, ADC 9148 © Triumph Designs Ltd 2009.
- Page 5 1. Reed-switch wiring connector the user guide. 2. Alarm/immobiliser wiring connector 6. Locate the black, twelve pin connector on the main wiring harness and remove the connector shorting plug. Publication part number A9900449, Issue 2, ADC 9148 © Triumph Designs Ltd 2009.
- Page 6 Wear suitable protective gloves and do not point the heat gun at any part of your body as serious burns to the skin may result. Publication part number A9900449, Issue 2, ADC 9148 © Triumph Designs Ltd 2009.
- Page 7 1. Adhesive backed reed switch 1 off authorised Triumph dealer and do not ride the motorcycle until the authorised dealer 2. Adhesive backed magnet 1 off has declared it fit for use. Riding a 3.
Need help?
Do you have a question about the A9808092 and is the answer not in the manual?
Questions and answers