Acer A315-53G Service Manual page 85

14. Write Asset Tag to EEPROM
[Instruction] DMITOOLSx64 /Wasset Acer Asstag
C:\>DMITOOLSx64 /Wasset Acer Asstag
================================================================
COMPAL ELECTRONICS INC.
Author : STD SID TEAM.
WARNING: THIS PROGRAM IS FOR INTERNAL USE ONLY.
Copyright c 2012 COMPAL ELECTRONICS INC. All rights reserved.
================================================================
Waiting....................................
Successful, Please restart system to make this new DMI data effective.
NOTE:
After writing items (8)~(14), restart the system to get the latest DMI data.
•
If using the write command, enter the correct command string. Otherwise, it will display a
•
syntax error.
C:\>DMITOOLSx64 /Wlm
ERROR:
Parameter is lack case:
ERROR : The input parameter is lack.
Over parameters case:
ERROR : The input parameter is too much.
Syntax is wrong case:
ERROR : The syntax of the command is incorrect.
Write command with String which length is too long case:
ERROR : The string length is invalid.
Write UUID and its length is too long or short case:
ERROR : The UUID length is invalid.
Write LAN MAC and its length is too long or short case:
ERROR : The LAN MAC length is invalid.
Write UUID and don't use Hexadecimal number case:
ERROR : The input parameter is invalid, Please use hexadecimal number.
Write LAN MAC in Broadcom LAN case:
ERROR : Write LAN MAC only support Atheros/ Realtek LAN
System Utilities
Figure 2-63. Write Asset Tag
The syntax of the command is incorrect!
Figure 2-64. Syntax error
V3. 0. 0. 7
2-42