Table of Contents
Advertisement
WLAN Antenna (Aux) Removal
Prerequisite:
Detach the mylar securing the auxiliary antenna cable and eDP cable. Then unroute the eDP
1.
cable from the guides on the top side of the LCD cover.
Detach the mylar and disconnect the eDP cable from the CMOS and microphone module
2.
connector.
Service and Maintenance
LCD Panel Brackets Removal
Figure 5-189. Unrouting the Mylars
Figure 5-190. Disconnecting the eDP Cable
on page
5-114
5-121
- Quick Links:
- Mainboard Top View (Uma)
Hide quick links:
Advertisement
Table of Contents
