Main Tab (Windows 10) - Acer A315-53G Service Manual

Main Tab (Windows 10)

The Main tab allows the user to set the system time and date, enable or disable boot option, and
enable or disable recovery.
Information Main
System Time :
System Date :
Network Boot:
F12 Boot Menu:
Wake on LAN:
Touchpad:
Lid Open Resume:
Wake on USB while lid closed [Disabled]
D2D Recovery:
GPT Partition Recovery:
Clear GPT Partition
GPT Partition Record:
F1 Help
Exit
Esc
Product Information
System Time
System Date
Network Boot
F12 Boot Menu
2-5
InsydeH20 Setup Utility
Advanced Security Boot
[19:10:49]
[01/01/2017]
[Disabled]
[Disabled]
[Disabled]
[Advanced]
[Enabled]
[Enabled]
[None]
[None]
No Record
Select Item F5/F6
Select Menu
Enter
Figure 2-2. BIOS Main (Windows 10)
Table 2-11. BIOS Main Tab Parameters (Windows 10)
Example
HH:MM:SS
MM/DD/YY
[Enabled] / [Disabled]
[Enabled] / [Disabled]
Exit
Change Values
Select Sub-Menu
►
• The format is the number of string.
• The hours are displayed in 24-hour format.
• The values set in the two fields take effect
immediately.
The default Network Boot value in different
Boot Modes:
• [UEFI] Boot Mode : [Disabled]
• [Legacy] Boot Mode : [Enabled]
• This function enables or disables the ability
that user can press F12 while POST to
quickly select the boot device.
• Modification to the boot device order apply
only for the current session. The next time
your computer is rebooted it will use again
the boot device sequence as set in the
BIOS Setup Utility > Boot > Boot priority
order:.
• The default value is [Disabled].
Item Specific Help
Hour valid range is from 0 to 23.
Minute Valid range is from 0
to 59. Second Valid range is from 0 to
59. REDUCE/INCREASE : F5/F6.
F9 Setup Defaults
F10 Save and Exit
Remark
System Utilities
Rev. 5.0