Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for INNOSILICON T2T-32T BTC
Summary of Contents for INNOSILICON T2T-32T BTC
- Page 1 T2T-32T BTC USER MANUAL...
-
Page 2: Table Of Contents
Catalogue 1.Overview ......................0 2. Assemble the miner ..................1 2.1 Open the package to check the miner .................. 1 2.2 Assemble & Operate ......................1 3.Operate the miner....................4 3.1 Enter the miner console ......................4 3.2 Configure the pool ........................ 4 3.3 View the miner hash rate...................... -
Page 3: Overview
1.Overview Specifications T2T-32T Part Number 32T(±5%) Hashrate 2200w（±10%） Power Sha256 Algorithm 460mm（L）*160mm(W)*236mm（H） Size (L×W×H) 13.9kg Net Weight 0--45 ℃(device junction temperature) Operating Temperature Ethernet Network Connection... -
Page 4: Assemble The Miner
2. Assemble the miner 2.1 Open the package to check the miner ⚫ Check whether the warranty sticker is damaged, especially the one on hash board PSU port side. If the warranty sticker is damaged when you receive the miner, please contact our after-sales personnel in time. ⚫... - Page 5 1.IP SET button: Press it for 1—4 seconds and the following functions can be realized: (1) Sending the IP miner to the “Set IP” tool; (2) Changing the miner to a Static IP within the specific range with the IPset tool Press it for 4—15 seconds, the miner IP will be switched to DHCP and the pool settings will be restored to default settings.
- Page 6 4. Fault indicator: Can be lit and turned off using the batch management tool, making it easier to locate and find the miner.
-
Page 7: Operate The Miner
3.Operate the miner 3.1 Enter the miner console DHCP is the default IP mode of the miner (The normal indicator now is flickering in green when the DHCP service of the router is enabled.). Find the IP via the router or the IP scanner. Enter the IP of the miner in the browser and press the Enter button. -
Page 8: View The Miner Hash Rate
3.3 View the miner hash rate After configuring the pool, the miner will mine for you. You can view the hash rate in the Miner Status screen. 3.4 Network configuration... -
Page 9: Change The Operation Mode
3.5 Other pages 3.5.1 Change the operation mode There are 4 modes available and please click the “Save” icon after your modification. 3.5.2 Overview... -
Page 10: Firmware Upgrade
3.5.3 Firmware upgrade 3.5.4 Modify the login password... -
Page 11: Reboot
3.5.5 Reboot 3.5.6 Factory reset...
Need help?
Do you have a question about the T2T-32T BTC and is the answer not in the manual?
Questions and answers