Related Manuals for Rupes BR63AE
Summary of Contents for Rupes BR63AE
- Page 1 BR63AE BR65AE Random orbital sander with dust extraction OPERATING AND MAINTENANCE INSTRUCTIONS...
-
Page 2: Specifications
SPECIFICATIONS TYPE BR63AE BR65AE ELECTRIC SHOCK PROTECTION CLASS SUPPLY VOLTAGE ~ 230V-50Hz ~ 230V-50Hz CURRENT INPUT 2.4A 2.4A POWER INPUT 550W 550W ELECTRONIC OVERLOAD PROTECTION ELECTRONIC SPEED CONTROL WEIGHT 1.9 kg 1.9 kg VIBRATION FREQUENCY [1/min.] 3000 - 7000 3000 - 7000... - Page 3 THE INSTRUCTIONS TABLE OF CONTENTS This leaflet; “Safety Rules”; Diagram showing machine spare parts and accessories. MACHINE COMPONENTS 1. Rating plate 2. Power switch ON/OFF 3. Speed control 4. Working disk blocking button (only after the tool stop) 5. Extracted dust volume control 6.
- Page 4 To stop the tool - release the switch (move it backwards), and if it is blocked, press its rear part and let it return to STOP position.
- Page 5 TEST RUN Switch on the machine and check if there are any abnormal vibrations caused by the improper placement of the abrasive material. If there are, immediately switch off the machine and eliminate their source. MOTOR SPEED ADJUSTMENT The motor speed is adjustable with speed control knob (3). The motor speed depends on the type of abrasive material and the material to be worked.
- Page 6 RANDOM ORBITAL SANDER WITH DUST EXTRACTION...
- Page 7 WARRANTY TERMS AND CONDITIONS 1. NTS Sp. z o.o. [Ltd.] - the exclusive representative of RUPES s.p.a. in the Republic of Poland guarantees the highest quality and correct working of the machine operated in compliance with its operating instructions. 2. The Buyer obtains a 12-month warranty starting from the date of the purchase of the machine . This period will be extended by the number of days the machine is kept in the warranty repair service.
- Page 8 Poland, 05-083 Zaborów tel.: (022) 752 06 00 e-mail: nts@nts.com.pl Borzęcin DuŜy ul. Warszawska 749 fax: (022) 752 05 92 http://www.nts.com.pl...
Need help?
Do you have a question about the BR63AE and is the answer not in the manual?
Questions and answers