Table of Contents
Advertisement
Vector VIP System User's Manual
1) Remove both spools and the ribbon in place if there is one.
Pay
attention
to how
it is threaded.
2)
Remove the new ribbon and spools from their package.
3)
Unwind approxinately
24
inches of ribbon fran the feed sp::lOl.
4)
Place the feed spJOl on the left spindle and the take-up spool on the
right spindle.
5)
Thread the ribbon from the feed SIDol around the rollers, reverse control
levers, and frane sides.
6)
Tighten the ribbon by manually turning one of the spools.
The ribbon
installation is now complete.
4.4.12
Periodic Lubrication
In order to insure proper operation, certain points of the MP must be
lubricated at specific intervals.
Three different lubricants are required.
Code
02
G2
GIl
IE
scription
Light Machine Oil
Light Grease
Light Moly Grease
NCYl'E:
It is strongly suggested that in order to maXlmlze printer life, only
lubricants purchased from Vector Graphic be used.
Any substitution will
result in shortened printer life.
For first
and
second interval lubrication, see appendix in MP manual.
For
third interval lubrication, it is suggested that your MP dot Il'\Cl.trix printer
be
overhauled by your Vector Graphic dealer every 5 million lines of use to
assure dependable long life.
Rev. A 8/27/80
4-9
Advertisement
Table of Contents
