Compass Feature - Determining The North; Fence - Circular Fence - Dog trace X30T Operating Manual

8.3 Compass feature – determining the North
The N symbol indicates the direction of the magnetic north. If the two arrows are
simultaneously lit, direction to the North is between them.
8.4 FENCE – circular fence/circular acoustic boundary
The FENCE feature alerts you when the dog moves beyond the set area boundary,
which is adjustable within the range of 30 m to a maximum of 2 km from the receiver.
Circular fence may be activated for more dogs; settings are stored for each dog
separately.
If the dog moves beyond the set boundary, the receiver will emit long intermittent
beeping and the circle, for this dog, located under the direction indicator will flash
on the receiver display. To find out which dog has crossed the set boundary, switch
between paired transmitters until you find the flashing circle.
When this feature is turned on, the receiver must have good GPS signal:
1. Select the dog number for which you wish to enable FENCE on the main navigation
panel.
2. Long press the FENCE push button.
3. Set the acoustic boundary distance by
4. Press briefly
After the feature is turn on, FENCE is displayed on the main panel display. The top
line of the display shows FENCE if the feature is activated on at least one of the
collars paired with the receiver.
If the receiver starts to emit shorter intermittent beeping, it signifies that the
transmitter (collar) or the receiver does not have the GPS or RF signal. This may
happen if the dog enters building where no GPS signal is available, the RF signal is
out of range or the dog's transmitter battery is flat.
WARNING: Receiver should have the strongest GPS signal to ensure that the
FENCE feature is accurate. If the signal is weak, indication that dog crossed the
boundary will not be accurate (given by the GPS accuracy).
NOTE: To use the FENCE and tracking features simultaneously, pair one dog into
two positions in the receiver. Then, in one of the positions the FENCE feature may
be activated and use the second one for tracking.
Turning off FENCE:
1. Select the dog number for which you wish to disable FENCE on the main
navigation panel.
2. Press and hold the FENCE push button.
3. Set OFF by
4. Press briefly
20
to return to the main screen.
/ arrows.
to return to the main screen.
/ arrows.