Installing the Wall Mount Bracket
Positioning the Installation Holes of the Wall Anchor Plates
1.
Align the marks on the upper edges of the projection screen printed on the
positioning sheet with the upper edges of the projection screen.
The scales on either side of the positioning sheet indicate millimeter units.
2.
Align the positioning sheet with the center of the projection screen.
Position the center of the wall anchor plate 62.7 mm (2.5 inches) to the right of the center of the
projection screen.
3.
Drill holes in the wall in accordance with the image on the positioning sheet.
3.
B
2.
EN-10
1.
1.