Sms - easyteck T110 Manual

Managing the contact list
In "Contact list" menu you can choose from following options:
Add contact - Display - Send SMS - Call - Edit - Delete - Copy - Settings - Operation
Settings
Preferred memory: selection of preferred memory for contact storage
Fast dial: once enabled, it's possible to assign contacts to buttons 2 to 9. In order to call
those numbers, press the button and hold it for more than 2 seconds.
Memory status: displays SIM card memory and phone internal memory usage.
This option allows you to transfer contacts between SIM and phone internal memory.

5. SMS

Press UP arrow key in standby and accept by choosing OK.
Write message
First write message content.
18
Text writing
Switch between input modes (ABC, abc, 123) by pressing the
# key repeatedly.
In abc/ABC modes it's possible to write letters by pressing buttons 2-9. By pressing the but-
ton repeatedly, you write one of the characters listed on it. Single press results in first letter
being written, double writes the second one, etc.
You can shift the text cursor to the right/left by pressing UP/DOWN keys.
Inserting symbols, space, numbers.
Press * to open available characters menu and then choose the desired character by pres-
sing UP/DOWN arrow keys.
Accept by pressing (2).
You can insert space by pressing the 0 button. This option is disabled when in 123 mode.
In "123"mode you can directly input digits by pressing corresponding buttons.
You can send the short message you have written by pressing (2) Options > Send > Input
number > Add from contact list and then use UP/DOWN arrow keys to select recipient and
accept by pressing OK > Send.
19