Advertisement
Quick Links
IDentry-T65
Quick Manual
July 2015 Ver. 1
Introduction
Component
Quantity
T65
1
Bracket
1
Cable
4(Input:9PIN/Relay:6PIN/Reader:5PIN/Power,485:4PIN)
Screw
Bracket: 4(T3x20mm)/ Reader: 2(M3x6mm)
Cable-Connection
①Relay 1,2: Connects with door lock and alarm devices
②Card Reader: Connects with external card reader
③Sensor Input: Connects with various sensors (door contact, alarm
sensor etc) and exit button
④Wiegand Output: Outputs CARD datal
(Used when it is integrated with other main controller)
⑤Power Input/ RS 485: Outputs CARD data
(Used when it is integrated with other main controller)
⑥TEL-LINE: Connects with Extension Phone
⑦TCP/IP Connector: Communicate TCP/IP with PC
⑧ Controls speaker volume
⑨ Controls Mic volume
For the full version of this manual, please visit COMMAX online
www.commax.com > Customer > Manual and download full manuals for installation and users.
Access Control IDentry-T65 User Manual
http://www.commax.co.kr/boardnew/lib/downfile.php?db=TB_ENGLISH_manual&fnum=153
Access Control IDentry-T65 Installation Manual
http://www.commax.co.kr/boardnew/lib/downfile.php?db=TB_ENGLISH_manual&fnum=121
Access Control IDentry-CAMS-S User Manual
http://www.commax.co.kr/boardnew/lib/downfile.php?db=TB_ENGLISH_manual&fnum=133
1.
Power: Part ⑤ connects with DC12V and GND. It doesn't matter the direction of the
GND and VCC.
2.
Extension Phone: Part ⑥ connects with extension phone and the direction doesn't
matter. To communicate with extension phone, press # button and extension phone
number . It is possible to control speaker volume using part ⑧ and Mic volume using
part ⑨.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Commax IDentry-T65
Summary of Contents for Commax IDentry-T65
- Page 1 IDentry-T65 For the full version of this manual, please visit COMMAX online Quick Manual www.commax.com > Customer > Manual and download full manuals for installation and users. July 2015 Ver. 1 Introduction Access Control IDentry-T65 User Manual http://www.commax.co.kr/boardnew/lib/downfile.php?db=TB_ENGLISH_manual&fnum=153 Access Control IDentry-T65 Installation Manual...
- Page 2 Cable-Connection (ex:IDentry-T20-F) WIEGAND OUT: If connected to other main controller, it works as a card reader or 3. TCP/IP: Shows TCP/IP connects with T65 using the HUB. No distance limits using TCP/IP fingerprint reader only not controller. Part ④ connects with card reader port of and configure access control system with LAN or WAN.
- Page 3 Cable-Connection Register When ADMIN is registered, Press * button Press 1234, and *Button (Access to the system menu) Select “USER” and press * button Select “ENROLL” and press * button Input password(USER ID) and set up to the privilege; User or Admin (After User ID, press and set the privilege using the and button ) Register fingerprints and/or card When ADMIN is not registered,...
- Page 4 - When cleaning, do not use liquid solvent or wet cloth. Wipe with soft cloth. - Never disassemble or modify this device in any way. (COMMAX is not liable for problems caused by unauthorized modification or attempted repair) - Do not install this device near by TV, monitor or magnetic interference.
Need help?
Do you have a question about the IDentry-T65 and is the answer not in the manual?
Questions and answers