Page 1
USER MANUAL T20 Series Thank you for purchasing COMMAX products. Please carefully read this User’ s Guide (in particular, precautions for safety) before using a product and follow instructions to use a product exactly. The company is not responsible for any safety accidents caused by abnormal operation of the product.
Use soft cloth. water or beverage into the item. Do not renovate, repair or separate as Do not put around strong magnetic you want randomly. A/S will not be taken. things such as TV, monitor and magnet COMMAX Access Control Solutions...
Light on system status Slot to connect USB memory Color TFT LCD Display time, device status, user list and UI Speaker Output sound effect & voice message Fingerprint Sensor Connector Register and Connect to cable identify user’ s fingerprint COMMAX Access Control Solutions...
Fingerprint Registration Note - Register fingerprint Register fingerprint properly. Proper way Recommend to register other finger part when a finger is wounded. Recommend to register more than two fingers to ready for various situations. Improper way COMMAX Access Control Solutions...
Ethernet Connection with PC KJ 3400 that is supported to automatic MDI / MDIX can connect to PC through straight type but not cross type. COMMAX Access Control Solutions...
Instruction of Card Type www.commax.com COMMAX Access Control Solutions...
Page 15
Instruction of Card Type 1.File Excusion 1) Run Shortcut Tool. exe of KJ 3400 2) Connect TCP-IP to 3400 terminal port and PC COMMAX Access Control Solutions...
Page 16
Instruction of Card Type 2. Programme Explanation 1)Search device 2)It can set communication parameter of installed product 3)It can register and delete master card 3. Device Search of Programme Explanation(A) COMMAX Access Control Solutions...
Page 17
Instruction of Card Type 4. Change IP Address and Port(B) 1) It can modify selected Denice, ID ,Ip Address, Subnet mask, Default Gateway, Port Number and Language 5.Register and Delete Master Card(C) COMMAX Access Control Solutions...
Page 18
- It can flash LED of data click device when clicks GET FROM DEVICE(See E) - It automatically can be put card No. by voice message "verify card" next to GET FROM DEVICE. - It can register one(See D) to select register or delete card at the card type(See F) COMMAX Access Control Solutions...
4. ID (passwords), and how to set up a user or administrator Use the arrows on the arrow on the sensor then press the OK button ID (password) can be up and down. Then click OK to set the ID can be set. COMMAX Access Control Solutions...
4. Input password (USER ID) to delete and press OK button 5. Select "Fingerprint" and/or "ID Card" to delete ( If want to delete both fingerprint and card of the relevant ID, select "Delete All") 6. Press OK button after selection 7. Complete the delete COMMAX Access Control Solutions...
Page 26
4. Input Temp ID (Upto 8 digits ) and press OK button 5. Input access admission times ( Min. 1, Max. 9) with this them ID and Press OK button ) 6. Setup Temp ID completed COMMAX Access Control Solutions...
Device's time is applied to the time of the event. So it is important the accurate time. 2. Date Setup the date of the device. 3. Date Format (YYYY-MM-DD) Define date format at home screen 4. Language Choose the language COMMAX Access Control Solutions...
When the user input ID, it hides user ID as XXXXXX and enhance the security. 3. Tamer Alarm When it detects tamper, it activates alarm. 4. Touch Sensor If touch sensor is on, sensor lights off in normal condition and lights on when the user touch the sensor only. COMMAX Access Control Solutions...
Page 30
Reset all settings to the default 7. Clear General Log Delete all general log data 8. Clear Admin Log Delete all Admin log data 9. Clear User Info Delete entire user data including fingerprint, card data and it is unrecoverable COMMAX Access Control Solutions...
- No access with any form of authorization 6) CD : Card only - Not able to access even with the registered ID or Fingerprint 7) CD&FP : Both Card and Fingerprint required for Access - Card must be authorized before fingerprint authentication COMMAX Access Control Solutions...
Page 32
This function is connected to a fire alert system. An alert signal is activated when there is a fire or intrusion and all doors are forced open, Intrusion detector closes all doors when an intrusion is detected. COMMAX Access Control Solutions...
Page 33
9. Anti-Passback (No / Yes) Anti-passback activates through external wiegand input. If there is two controllers for enter and exit, re-enter is allowed only it has exit event data (EX : Public Parking lot, Restricted Area, Membership center ) COMMAX Access Control Solutions...
2. TCP/IP Settings 1) DHCP : No/ Yes Choose DHCP on or off 2) IP Address : 192.168.1.224 Setup IP Address 3) Subnet Mask : 255.255.255.000 Setup subnet mask 4) Port : 5005 Setup TCP Port COMMAX Access Control Solutions...
Displays MAC Address of the device. Cannot set it up from the device 8) Server Settings 7-1. IP Address Port / 7-2. Port / 7-3 Send Event 3.Com.Password (0~8) Set the password for the communications equipment. Password is not correct communication the PC program Communication is impossible. COMMAX Access Control Solutions...
Page 36
Settings - Log Settings 1. Admin Log Warning ( 0 ~ 100) If the management logo exceeds the setting value, it alarms 2. General Log Warning (0~2000) If the management logo exceeds the setting value, it alarms COMMAX Access Control Solutions...
Page 37
USB Disk www.commax.com COMMAX Access Control Solutions...
4. Download All Admin log Download new management events Download all management events 5. Download User Info 6. Upload User info Download user data Upload user data 7. Upgrade Firmware Update Firmware (File Name should be KJ-3400FW.bin) COMMAX Access Control Solutions...
Information www.commax.com COMMAX Access Control Solutions...
Page 40
Template numbers which is enrolled in the device 3. ID Card ID Card numbers which is enrolled in the device 4. General Log General log ( access event ) numbers 5. Admin Log Management log ( system event ) numbers COMMAX Access Control Solutions...
Page 41
Displays the device serial number 4. Product Name 3. Manufacturer Displays the device Name Displays the device manufacturer 5. Product Type 6. Engine Version Displays the device Type Displays the engine version 7. Firmware Version Displays the firmware version COMMAX Access Control Solutions...
- Connect to exit button or various sensors (door contact, security sensor or etc.) CN2) Power Input - Supply 12V to desktop through power supply CN3) RS485 / RS422(T-20) - Possible to use 485 or 422 communication COMMAX Access Control Solutions...
Cable Connection - RF Card Reader CON4 Reader (ex : KP-10) Red:12V Black : GND Green : Date 0 White : Date 1 Blue : LED Control COMMAX Access Control Solutions...