Advertisement
2B
Bring the power wires to the fixture location in
3
accordance with local electrical codes.
4
Connect the white fixture wire to one of the low-
voltage power line wires with the provided outdoor
waterproof wire nut.
5
Connect the black fixture wire to the remaining low-
voltage power line with the provided outdoor
waterproof wire nut.
2C
Stake the fixture to the desired location and properly
6
bury the wire and wire nut connections.
5
4
3
Install the Fixture to Concrete
(or other hard surfaces)
3A
.58"
Bring the power wires to the fixture location in
1
accordance with local electrical codes.
2
Mount the base plate to an even and smooth surface
using the template provided on last page. Ensure that
length of the lag bolts or anchor bolts do not exceed
.58" from the mounting surface in order to leave
enough clearance for the fixture to fit properly over the
base plate.
3B
CONNECTION
BOX COVER
DOME NUT
CONNECTION
BOX COVER
SCREW
Unscrew the 10 connection box cover screws under the
3
fixture and remove the connection box cover.
4
Remove the provided strip of cord by first disconnecting
the 3 wire nut connections; save the wire nuts.
Warning: do not disconnect the output driver
connections.
5
Unscrew the cord grip's dome nut (save the nut),
remove the provided cord strip, and discard of cord
properly.
2
FIXTURE
BASE PLATE
1
BASE PLATE
4
5
3
2
4
CORD GRIP
CORD STRIP
Advertisement
