Maintenance Storage; Service And Repair - RIDGID ProPress Series Operator's Manual

ProPress XL Press Rings
Catalog
No. Description
93677 2 1 / " ProPress XL Press Ring Set
2
93682 3" ProPress XL Press Ring Set
93687 4" ProPress XL Press Ring Set
93692 R2 Actuator
16803 ProPress XL Set Carrying Case
93667 R2 Kit, 2 1 / " - 4"
2
ProPress XL-C Press Rings
Catalog
No. Description
20543 2 1 / " ProPress XL-C Press Ring Set
2
20548 3" ProPress XL-C Press Ring Set
20553 4" ProPress XL-C Press Ring Set
21878 V2 Actuator
21103 ProPress XL-C Set Carrying Case
20483 V2 Kit, 2 1 / " - 4"
2
Machine Storage
WARNING
kept indoors or well covered in inclement weather. Store
in a locked area out of the reach of children and people
unfamiliar with the tools. These tools can cause serious
injury in the hands of untrained users.

Service and Repair

Improper service or repair can make attachments
unsafe to operate.
The "Maintenance Instructions" will take care of most of the
service needs of this machine. Any problems not ad-
dressed by this section should only be handled by an
authorized RIDGID service technician.
No Service parts are sold for these attachments. If parts
are needed, the attachment should be discarded and a
new unit purchased.
For information on your nearest RIDGID Independent
Service Center or any service or repair questions:
• Contact your local RIDGID distributor.
• Visit www.RIDGID.com or www.RIDGID.eu to find
your local Ridge Tool contact point.
• Contact Ridge Tool Technical Services Department at
techservices@ridgid.com, or in the U.S. and Canada
call (800) 519-3456
Ridge Tool Company
ProPress ® Fitting System
These tools and attachments must be
WARNING
13